Automatic Transmission/Transaxle - TorqShift

Transmission Fluid Cooler Tubes TorqShift





Special Tool(s)





Material

Removal
1. With the vehicle in NEUTRAL, position it on a hoist.





2. Remove the bolts and the skid plate (4x4 only).





3. Remove the bolts and the air deflector.





4. Using the special tool, disconnect the fluid cooler tubes from the remote mount transmission fluid filter housing.





5. Remove the transmission fluid cooler lines from the transmission case.





6. Remove the nut, the fluid cooler tube bracket and the fluid cooler tubes.





7. Remove the three bolts from the remote mounted transmission oil filter bracket.





8. Remove the inlet and outlet lines from auxiliary fluid cooler and radiator in-tank reservoir.
1 Remove the cooler line clips.
2 Disconnect the fluid lines from the radiator in-tank reservoir.
3 Remove the constant tension clamp from the auxiliary cooler outlet and disconnect the hose.
4 Remove the constant tension clamp from the fluid filter return inlet line and disconnect the hose.

Installation





1. Install the inlet and outlet lines from auxiliary fluid cooler and radiator in-tank reservoir.
1 Install the cooler line clips.
2 Connect the fluid lines to the radiator in-tank reservoir.
3 Connect the hose and install the constant tension clamp from the auxiliary cooler outlet.
4 Connect the hose and install the constant tension clamp from the fluid filter return inlet line.





2. Install the remote mount transmission fluid filter bracket.





3. Install the fluid cooler tubes, the fluid cooler tube bracket and the fluid cooler tube bracket nut.





4. Connect the transmission cooler inlet and outlet lines to the remote mount fluid filter housing.





5. Install the fluid cooler tubes in the front and rear cooler line case fittings.





6. Position the air deflector and Install the bolts.





7. Position the skid plate and install the bolts (4A only).

8. CAUTION: Use only MERCON (R) SP Transmission Fluid to service TorqShift transmissions. Mixing MERCON (R) or MERCON (R) V in a TorqShift transmission may cause transmission damage. Use of any fluid other than the recommended fluid can cause transmission damage.

Fill the transmission with the specified type and quantity of transmission fluid.
9. Check for leaks.