Wheel Stud / Lug Nut: Service and Repair

Wheel Studs





Special Tool(s)

Removal
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the wheel and tire assembly.
3. Remove the disc brake caliper and rotor.
4. Remove the rear wheel hub assembly.





5. Using a suitable press, remove the wheel bolt from the wheel hub and discard.

Installation





1. Using a suitable press, install the new wheel bolt aligning the serrations in the wheel hub flange made by the original wheel bolt.
2. Install the rear wheel hub assembly.
3. Install the disc brake caliper and rotor.
4. Install the wheel and tire assembly.
5. Lower the vehicle.