Safety Belt Shoulder Height Adjuster - Front Row

SAFETY BELT SHOULDER HEIGHT ADJUSTER - FRONT ROW

Torx Bit, Safety Belt Bolt:

Special Tool(s)

Removal







1. NOTE: Inspect the shoulder safety belt guide and cover for damage. If the shoulder safety belt guide or cover is damaged or cover does not remain closed, install a new shoulder safety belt guide.

Remove the shoulder safety belt guide.
1 Position the shoulder safety belt guide cover up.
2 Remove the shoulder safety belt guide nut.
3 Remove the shoulder safety belt guide.

2. Remove the front door scuff plate, the rear door scuff plate, the rear assist handle and the center body pillar trim panel.







3. Remove the height adjuster cover.







4. Remove the shoulder safety belt height adjuster.
1 Use the Seat Belt Bolt Bit to remove the bolts.
2 Remove the shoulder safety belt height adjuster.

Installation












1. NOTE:
- Make sure the safety belt webbing is not twisted prior to installation.
- Make sure to tighten nuts and bolts to specification.
- Inspect the shoulder safety belt guide and cover for damage. If the shoulder safety belt guide or cover is damaged or cover does not remain closed, install a new shoulder safety belt guide.

To install, reverse the removal procedure.

2. Check the restraint system for correct operation.