Body Support - Front Upper

BODY SUPPORT-FRONT UPPER

Removal

1. CAUTION: When removing upper body insulators, all other body mount support bolts must be loose before raising the vehicle cab to prevent permanent structural damage from occurring to the vehicle cab.

Remove the lower body insulator.

2. Remove the opposite side front body insulator bolt.
3. Raise the vehicle body enough to allow removal of the insulator.







4. Remove the insulator.

Installation

NOTE: Do not reuse body support mounting fasteners. New fasteners must be installed for each fastener that has been removed or loosened.







1. NOTE: No lubricants of any kind are to be used during body insulator installation.

Follow the removal procedure in reverse order.