DVD Player: Service and Repair

DIGITAL VERSATILE DISC (DVD) PLAYER

REMOVAL

1. NOTE: The following removal and installation procedures apply to all original-equipment DVD player units.

Disconnect the battery.







2. Remove the screws.







3. Lower the video system enclosure.
- Grasp the front edge of the enclosure and pull down gently.







4. Disconnect the DVD player electrical connector.







5. Disconnect the heater control electrical connectors.







6. Remove the DVD player.
1 Disconnect the electrical connector.
2 Remove the screws.







7. Disconnect the infrared electrical connector.

INSTALLATION
1. To install, reverse the removal procedure.