Drive/Propeller Shaft: Labor Times

	Standard Hours	Manufacturer Warranty Hours	Skill Level	Notes
Replace
Front Axle	0.8	0.4	C
NOTE
To R&R U-Joints, Add
Two Piece Driveshaft
Front	0.6	0.5	C
Rear
Without Double Cardan	0.6	0.5	C
With Double Cardan	1.0	0.8	C
To R&R Center Support Bearing, Add	0.6	0.5	C
Rear Axle	0.5	0.4	C
NOTE
To R&R Center Support Bearing, Add	0.6	0.5	C
To R&R U-Joints, Add
Two Piece Driveshaft
Front
Without Double Cardan	0.6	0.5	C
With Double Cardan	0.8	0.7	C
Rear	0.6	0.5	C
Center
Without Double Cardan	0.6	0.5	C
With Double Cardan	0.8	0.7	C