Crankshaft Main Bearing

Crankshaft Main Bearing
1) Tighten to 122 Nm (90 ft. lbs.) in numerical sequence.
2) Tighten to 163 Nm (120 ft. lbs.) in numerical sequence.
3) Tighten to 231 Nm (170 ft. lbs.) in the numerical sequence.





Install eight M8 x 30 bolts around the outside of the lower crankcase. Tighten bolts to the special torque using the sequence shown.





Install the lower crankcase. Install all 20 lower crankcase main bearing mounting bolts. Tighten mounting bolts in the following sequence.

1) Tighten to 122 Nm (90 ft. lbs.) in numerical sequence.
2) Tighten to 163 Nm (120 ft. lbs.) in numerical sequence.
3) Tighten to 231 Nm (170 ft. lbs.) in the numerical sequence.





Install eight M8 x 30 bolts around the outside of the lower crankcase. Tighten bolts to the special torque using the sequence shown.