Safety Belt Buckle - Second Row, 60/40, Center

SAFETY BELT BUCKLE - SECOND ROW, 60/40, CENTER

Torx Bit, Safety Belt Bolt:

Special Tool(s)

Removal and Installation
1. Position the second row 40 percent seat forward.







2. Remove the safety belt buckle.
1 Using the special tool 501-010 (T77L-2100-A), remove the bolt.
2 Remove the safety belt buckle.

3. NOTE: Make sure to tighten the bolts to specification.

To install, reverse the removal procedure.
- See the removal procedure or Specifications for torque specifications.

4. Check the restraint system for correct operation.