Bulb - Headlamp, Sealed Beam

BULB - HEADLAMP, SEALED BEAM

Removal and Installation







1. Remove the two lower headlamp bezel screws.







2. Remove the headlamp bezel.
- Remove the two top headlamp bezel screws and release the locking tab.
- Disconnect the electrical connectors.







3. Remove the headlamp.
1 Remove the headlamp retaining ring screws.
2 Remove the headlamp retaining ring.
3 Position the headlamp so the electrical connector can be accessed.
4 Disconnect the electrical connector.

4. To install, reverse the removal procedure.