Rear Seat Backrest - Second Row, 60 Percent

REAR SEAT BACKREST - SECOND ROW, 60 PERCENT

Disassembly and Assembly

1. NOTE: 60 percent seat shown, 40 percent seat similar.

Remove the seat backrest.







2. Remove the screws for the load floor panel.







3. Remove the screws.
4. Remove the armrest.







5. Unclip the J-clips.







6. Remove the seat handle clip and handle.







7. Position the upholstery, then remove and discard the pin-type retainers.







8. Position the upholstery and remove the hog rings.







9. Lift the backrest pad and remove the headrest guide pins.
10. Remove the upholstery.







11. Remove the staples, then the backrest pad.







12. Remove the screws.







13. Unclip the J-clips.







14. Remove the upholstery.
15. To assemble, reverse the disassembly procedure.