Rear Seat Cushion - Second Row

REAR SEAT CUSHION - SECOND ROW

Removal

NOTE: 60 percent seat shown, 40 percent seat similar.

1. Remove the seat.







2. Remove the four nuts.

Installation







1. Release the tension on the push nuts to allow the cushion studs to move freely.







2. Position the seat cushion to the seat riser, then loosely install the nuts.







3. NOTE: Make sure the bumper pins are centered in the holes of the cushion frame.

Align the cushion frame to the bumper pins.







4. NOTE: Make sure the seat cushion is closed and positioned as if it were installed.

Tighten the nuts.

5. Check the seat cushion latch for correct operation.
6. Install the seat.