Front Seat Cushion - Captain's Chair and 40 Percent
FRONT SEAT CUSHION - CAPTAIN'S CHAIR AND 40 PERCENTRemoval and Installation
1. Remove the side shield.
2. Remove the seat track.
3. Disconnect the electrical connectors and remove the wire harness.
4. Remove the two lumbar actuator screws.
5. Unclip the lumbar control cable from actuator.
6. Remove the two bolts and remove the front seat adjuster.
7. CAUTION: Do not damage the plastic pivot bushing when removing the seat backrest.
Pull the front seat backrest away from the seat hinge and feed the lumbar cable and heating element wire through the seat cushion opening. Separate the seat cushion from the seat backrest.
8. To install, reverse the removal procedure.