Hood Latch Release Cable: Service and Repair

HOOD LATCH RELEASE HANDLE - CABLE

Removal and Installation
1. Disconnect the battery.
2. Remove the hood latch.







3. Remove the pin-type retainers.
4. Position the air deflector aside to reveal the hood latch release cable guide.







5. Remove the hood latch release cable guide.







6. Remove the remaining hood latch release cable guides.
7. Remove the powertrain control module (PCM).
8. Remove the A-pillar lower trim panel.







9. Remove the nuts.
10. Lower the hood latch release/park brake bracket from the vehicle.
11. Remove the hood latch release cable from the handle.
- Release the cable conduit.
- Remove the cable.

12. Remove the hood latch release cable and dash panel grommet through the front of the vehicle.
13. To install, reverse the removal procedure.