1-2 Accumulator

1-2 Accumulator

Removal





1. Compress the 1-2 accumulator cover and remove the accumulator piston retaining ring.





2. NOTE: Note the location of the 1-2 accumulator springs for reference during assembly.

Remove the 1-2 accumulator.
1. Remove the 1-2 accumulator cover.
2. Remove the inner and outer 1-2 accumulator springs.
3. Remove the accumulator piston.
4. Remove the upper 1-2 accumulator spring.

Installation





1. Install the 1-2 accumulator.
1. Install the 1-2 accumulator upper spring.
2. Install the accumulator piston.
3. Install the inner and outer 1-2 accumulator springs.
4. Install the cover and seal assembly.





2. Compress the 1-2 accumulator springs and install the accumulator piston retaining ring.