Output Shaft Speed (OSS) Sensor

Output Shaft Speed (OSS) Sensor

Removal
1. With the vehicle in NEUTRAL, position it on a hoist.





2. Disconnect the output shaft speed (OSS) sensor.





3. NOTE: Prior to removing the speed sensor, make sure that the area around the sensor is free of debris to prevent contamination of the transmission.

Remove the output shaft speed (OSS) sensor.
1. Remove the bolt.
2. Remove the output shaft speed (OSS) sensor.

Installation





1. Install the output shaft speed (OSS) sensor.
1. Lubricate the O-ring and install the output shaft speed (OSS) sensor.
2. Install the bolt.





2. Connect the output shaft speed (OSS) sensor electrical connector.