Fuel Injection Pressure Regulator (IPR) Valve

FUEL INJECTION PRESSURE REGULATOR (IPR) VALVE

Socket, Fuel Injector Pressure Regulator Valve:

Special Tool(s)

Removal and Installation

WARNING: Do not carry out this repair until the engine has cooled. Failure to follow these instructions may result in personal injury.

1. Remove the engine cover.







2. NOTE: It will be necessary to position back or remove the heat insulating wrap.

Disconnect the injection pressure regulator (IPR) valve electrical connector.







3. Unsnap and remove the heat insulating wrap.







4. Using the special tool, remove the IPR valve.
5. To install, reverse the removal procedure.