Lifter / Lash Adjuster: Service and Repair

Camshaft Roller Follower and Hydraulic Lash Adjuster





Special Tool(s)

Removal and Installation
1. Remove the LH and RH valve covers.
2. Remove the components in the order indicated.





3. To install, reverse the removal procedure.
4. Install the LH and RH valve covers.

Item 1: Camshaft Roller Followers Removal Note





1. Rotate the crankshaft until the camshaft for the cylinder being serviced is at base circle.





2. NOTE: Mark each camshaft roller follower to make sure it is returned to its original position.

Using the special tool, remove the camshaft roller followers.

Item 2: Hydraulic Lash Adjuster Removal Note





1. NOTE: Mark each hydraulic lash adjuster to make sure it is returned to its original position.

Remove the hydraulic lash adjusters.

Item 11: Camshaft Roller Followers Installation Note





1. NOTE: The roller followers must be installed in their original position.

Using the special tool, install the roller followers.