Thermostat: Service and Repair

Thermostat and Thermostat Housing - 4.0L SOHC

Material:

Material

Removal and Installation

1. Drain the engine cooling system.

2. Remove the components in the order indicated in the following illustration and table. To remove individual components, only carry out the listed steps.

Steps:

3. To install, reverse the removal procedure.


4. Fill and bleed the cooling system.

ITEM 10: Thermostat Housing Installation Note

1. Inspect the thermostat housing gasket for damage. Install a new gasket as necessary.

ITEM 4: Thermostat Housing Cover Installation Note

1. Inspect the thermostat housing cover gasket for damage. Install a new gasket as necessary.