Torque Converter
Torque Converter1. A new or remanufactured torque converter must be installed if one or more of the following statements are true:
^ A torque converter malfunction has been detected based on completed diagnostic procedures.
^ NOTE: Stud threads can be repaired using a "thread chase".
Converter stud(s), impeller hub or bushing is damaged.
^ If there is a discoloration of the torque converter (due to overheating).
^ The torque converter is found to be out of specification, when carrying out the following checks:
^ Torque converter pump insert check
^ Torque converter end play check
^ Torque converter turbine torque check
^ Torque converter leakage check
^ If there is evidence of transmission assembly damage or fluid contamination due to the following transmission or converter failure modes:
^ Major metallic failure
^ Multiple clutches or clutch plate failures
^ Component wear which results in metallic contamination