Seats: Description and Operation

SEATS

The seats consist of the following components:
- seat track
- seat track with height adjuster (driver)
- power seat track (driver)
- seat control switch
- heated seat switch
- heated seat grids (in seat cushion and backrest)
- lumbar support (driver)
- outboard seat cushion side shields
- inboard seat cushion side shields
- side air bags (if equipped)
- safety belt pretensioners
- front seat backrests
- front seat cushions
- 40% rear seat cushion
- 60% rear seat cushion
- 40% rear seat backrest
- 60% rear seat backrest
- bench rear seat backrest
- bench rear seat cushion
- rear seat backrest latches
- rear seat headrests
- headrest guide posts
- rear seat side trim panels
- rear seat backrest recliners (if equipped)
- front seat storage drawer

The seat options consist of:
- high back bucket (leather, driver power, driver lumbar, dual map pockets, optional side air bag)
- high back bucket (high series cloth, driver lumbar, dual map pockets, driver height adjuster, optional side air bags)
- high back bucket (low series cloth, optional side air bag)
- low back bucket (high series cloth, driver lumbar, optional passenger seat trays, optional side air bag)
- bench rear seat (low series cloth, seatback dump latch)
- 60/40 rear seat (high series cloth, seatback dump latch, backrest recliners)
- 60/40 rear seat (leather, seatback dump latch, backrest recliners)
- heated seat, driver and passenger front only

Side Air Bag
Driver and passenger side air bags are attached to the seat backrest frame. For diagnostic information or if the side air bag has been deployed, refer to Air Bag Systems.

Front seat backrest trim covers installed on seats with side air bags cannot be repaired. The front seat backrest trim covers are to be installed new. Cleaning is permissible.

If a side air bag deployment took place, install a new seat back pad, trim cover and side air bag module. Install a new seat back frame if necessary.