Liftgate window Latch

LIFTGATE WINDOW LATCH

REMOVAL

NOTE: Make sure the liftgate window glass is in the raised position.

1. Remove the liftgate trim panel.







2. Disconnect the liftgate window latch.
1 Disconnect the liftgate window latch ajar switch electrical connector.
2 Open the clip and disconnect the actuating rod.







3. NOTE: Mark the position of the liftgate window latch prior to removing the nuts.

Remove the liftgate window latch.
1 Remove the bolts.
2 Remove the latch.

INSTALLATION







1. Position the liftgate window latch and loosely install the bolts.
2. Adjust the liftgate window latch.
- Set the liftgate window glass flushness to 1.5 mm (0.06 in) under flush.







3. Tighten the liftgate window latch bolts.







4. Connect the liftgate window latch.
1 Connect the liftgate window latch ajar switch electrical connector.
2 Connect the actuating rod and close the clip.

5. Install the liftgate trim panel.