Front Door Window Regulator: Service and Repair

FRONT DOOR WINDOW REGULATOR AND MOTOR

Removal and Installation
1. Position the front door window glass to the half-open position.
2. Remove the front door mounted speaker.







3. Remove the inside glass weatherstrip.







4. Remove the watershield.







5. Disconnect the lock rod at the handle assembly.
1. Release the clip.
2. Position the actuating rod aside.







6. NOTE: Some vehicles may use rivets to attach the glass to the regulator.

Remove the bolts that attach the glass to the regulator.







7. NOTE: The window must be in the full up position for this step.

Support the window glass.







8. Disconnect the window motor electrical connector.







9. Disconnect the regulator and motor assembly from the door frame.







10. Remove the regulator and motor assembly through the door opening.
11. To install, reverse the removal procedure.
- Position the lock knob in the full unlocked position before installing the actuating rod.