Transfer Case Draining and Filling

Transfer Case Draining and Filling,





1. Remove the drain plug and drain the fluid.
Clean and install the drain plug after fluid is drained.





2. CAUTION: Incorrect fluid fill can result in transfer case failure.

NOTE: Clean the area around the fill plug.

Remove the fill plug, and fill the transfer case.
^ The fluid must be just below the fill plug hole. Because you can reach the fluid with a finger does not mean the fluid is at the correct level. Make sure the fluid is level with the filler opening for the correct fluid level.
^ The total transfer case fill capacity is 1.25 Liter (2.6 pints).





3. Install the fill plug.