Drive/Propeller Shaft: Description and Operation

Universal Joints








The universal joints are:
^ lubed-for-life design and require no lubrication.
^ equipped with nylon thrust washers, located at each base of the bearing cup, which control end play, position the needle bearing and improve grease movement.

Driveshaft





Driveshaft - Rear





Driveshaft - Front





NOTE: Whenever the vehicle is raised on a hoist, inspect the universal joint slip yoke boot for rips or holes. Replace if required.

NOTE: All driveshafts are balanced. If undercoating the vehicle, protect the driveshaft and universal joints to prevent application of any undercoating material.

NOTE: The Constant Velocity (CV) joint on the front driveshaft is not serviceable.

The front driveshaft is connected to the transfer case and the front drive axle by a driveshaft flange yoke.