Pilot Bearing: Service and Repair

Bearing

Special Tools:

Special Tool(s)

Removal





1. Using the special tool, remove the transmission input shaft pilot bearing.





2. Inspect the transmission input shaft pilot bearing for:
^ misalignment and looseness in the flywheel.
^ needle rollers for scoring, worn or broken needle rollers, inadequate grease or discoloration.
^ seal leakage.

Installation





1. NOTE: The transmission input shaft pilot bearing can only be installed with the seal facing the transmission. The transmission input shaft pilot bearing is pregreased and does not require additional lubrication. A new transmission input shaft pilot bearing must be installed whenever it is removed.

Using a soft-face hammer and the special tool, install the transmission input shaft pilot bearing.