Locking R-Clip Fuel Line Fittings

Disconnect

WARNING:
^ DO NOT SMOKE OR CARRY LIGHTED TOBACCO OR OPEN FLAME OF ANY TYPE WHEN WORKING ON OR NEAR ANY FUEL-RELATED COMPONENT. HIGHLY FLAMMABLE MIXTURES ARE ALWAYS PRESENT AND MAY BE IGNITED, RESULTING IN POSSIBLE PERSONAL INJURY.
^ FUEL IN THE FUEL SYSTEM REMAINS UNDER HIGH PRESSURE EVEN WHEN THE ENGINE IS NOT RUNNING. BEFORE SERVICING OR DISCONNECTING ANY OF THE FUEL LINES OR FUEL SYSTEM COMPONENTS, THE FUEL SYSTEM PRESSURE MUST BE RELIEVED.

CAUTION: Do not use any tools. The use of tools may cause a deformity in the clip components which may cause fuel leaks.

1. Relieve the fuel pressure.







2. Push tab and unlock from the R-clip.







3. Push the clip into the fitting.







4. Separate the fitting from the tube.

Connect
1. To connect, reverse the disconnect procedure.