Inspection and Verification

INSPECTION AND VERIFICATION

NOTE:
- A new instrument cluster must be reconfigured.
- When installing a new instrument cluster, it is necessary to contact the Instrument Cluster Program.

1. Verify the customer concern by operating the instrument cluster and message center to duplicate the condition by observing the indicator, warning displays, and gauges to determine if they are operating correctly with the ignition switch:
- in RUN with the engine off.
- in START before the ignition switch is released.
- in RUN with the engine running.

Visual Inspection Chart:

2. Visually inspect for obvious signs of mechanical and electrical damage.
3. If the inspection reveals obvious concern(s) that can be readily identified, repair as necessary.
4. If the concern remains after the inspection, connect the diagnostic tool to the data link connector (DLC) located beneath the instrument panel and select the vehicle to be tested from the diagnostic tool menu. If the diagnostic tool does not communicate with the vehicle:
- check that the program card is correctly installed.
- check the connections to the vehicle.
- check the ignition switch position.

5. If the diagnostic tool still does not communicate with the vehicle, refer to the diagnostic tool manual.
6. Carry out the DATA LINK DIAGNOSTIC TEST. If the diagnostic tool responds with:
- CKT693, CKT914, CKT915 or CKT70 = ALL ECUS NO RESP/NOT EQUIP, refer to Information Bus (Module Communications Network).
- NO RESP/NOT EQUIP for the instrument cluster, refer to Instrument Panel, Gauges and Warning Indicators.
- SYSTEM PASSED, retrieve and record the continuous diagnostic trouble codes (DTCs), erase the continuous DTCs and carry out self-test diagnostics for the instrument cluster.

7. If the DTCs retrieved are related to the concern, refer to the Instrument Cluster Diagnostic Trouble Code (DTC) Index to continue diagnostics. Trouble Code Descriptions - Late Build
8. If no DTCs related to the concern are retrieved, proceed to the Symptom Chart to continue diagnostics. Diagnosis By Symptom - Late Build