Fan Blade: Service and Repair

Cooling Fan





Special Tool(s)

Removal and Installation





All vehicles
1. Remove the radiator appearance cover.





Vehicles equipped with a 4.6L engine
2. Detach the A/C tube from the retainers.





All vehicles

3. NOTE: Some fan shrouds are equipped with two assembly screws.

Remove the bolt, and remove and discard the assembly screw(s), if equipped.





4. Remove the bolt, and remove and discard the assembly screw(s), if equipped.





5. Remove the upper fan shroud.





6. Using the special tools, remove the fan blade and clutch assembly.

7. NOTE: It is not necessary to install the screws holding the upper and lower shrouds together.

To install, reverse the removal procedure.