Fan Shroud: Service and Repair

Cooling Fan Shroud

Removal and Installation
1. Drain cooling system.





2. Remove the radiator appearance cover.





3. NOTE: Some fan shrouds are equipped with only one assembly screw.

Remove the bolt, and remove and discard the assembly screw, if equipped.





4. Remove the bolt, and remove and discard the assembly screw, if equipped.





5. Remove the upper fan shroud.
6. Raise and support the vehicle.





7. Disconnect the RH degas fill hose.





8. Remove the bolts, and remove the lower fan shroud.

9. NOTE: It is not necessary to install the screws holding the upper and lower shrouds together.

To install, reverse the removal procedure.