Brake Disc

Brake Disc

Removal
1. Remove the front disc brake caliper support bracket.

2. NOTE: Match-mark the brake disc and hub.

Remove the brake disc.





3. CAUTION: Use a hub-mount brake lathe if necessary to machine the brake disc. Measure the brake disc and resurface as necessary.

Install a new brake disc if beyond specification.

Installation
1. Position the brake disc to the wheel hub.
^ Use Metal Brake Parts Cleaner F6AZ-2C410-AB or equivalent to clean the brake disc.
^ Using match-marks, mount the brake disc on the hub.
^ Apply High Temperature Nickel Anti-Seize Lubricant F6A_Z-9IA94-AA or equivalent meeting Ford specification ESE-Ml2A4-A to the hub mounting surface to prevent future corrosion.
2. Install the front disc brake caliper support bracket.