Rear Seat Backrest - 60/40 Bench, Second Row
REAR SEAT BACKREST - 60/40 BENCH, SECOND ROWDisassembly and Assembly
NOTE: 40 percent seat shown, 60 percent seat is similar.
1. Remove the seat from the vehicle.
2. Separate the seat backrest from the lower seat frame.
3. Remove the head restraint.
- Remove the LH and RH head restraint retainer clips.
- Pull head restraint from seat backrest.
4. Release the backrest cushion covering.
1. Release the backrest J-clip.
2. Remove the staples that attach the backrest covering.
5. CAUTION: Use care when separating the seat cushion covering from the hook and loop fasteners to avoid tearing the fastener off of the seat foam.
Separate the seat cushion fabric from the hook and loop fasteners. Remove the seat backrest covering from the cushion foam.
6. To assemble, reverse the disassembly procedure.