Rear Seat Cushion - 40/20/40 Bench, Second Row

REAR SEAT CUSHION - 40/20/40 BENCH, SECOND ROW

Disassembly and Assembly

NOTE: 40 percent seat shown, 20 percent seat is similar.

1. Remove the rear seat from the vehicle.
2. Remove the rear seat cushion from the frame.







3. CAUTION: Use care when separating the seat cushion covering from the hook and loop fasteners to avoid tearing the fastener off of the seat foam.

Separate the seat cushion hook and loop fasteners. Remove the upholstery from the foam cushion.







4. Remove the bench leg bolts.







5. Release the flex mat J-clips. Remove the flex mat from the seat frame.
6. To assemble, reverse the disassembly procedure.