Sunroof / Moonroof Frame: Service and Repair

ROOF OPENING PANEL FRAME

Removal and Installation

NOTE: The roof opening panel frame is not separately serviced, it is serviced only with the roof opening panel assembly.

1. Remove the headliner.







2. Remove the screws and remove the upper console bracket.







3. Disconnect the roof opening panel motor electrical connector.







4. NOTE: RH shown LH similar.

Remove the rear mounting bracket screws and disconnect the rear drain hoses.







5. NOTE: LH shown RH similar.

Disconnect the front drain hoses from the roof opening panel frame.







6. CAUTION: To avoid damage to the roof opening panel frame, be sure to support the roof opening panel frame when removing the mounting screws.

Remove the roof opening panel frame mounting screws.

7. To install, reverse the removal procedure.