B-Pillar Trim Panel

REMOVAL
1. Remove the front and rear scuff plates.







2. Raise the seat belt shoulder strap slider plate into the complete up position.







3. Remove the front and rear door opening weatherstrips along the entire length of the B-pillar trim panel.







4. Remove the lower safety belt anchor bolt.







5. Remove the upper trim panel clips.

NOTE: Trim panel clips must be correctly installed during install procedure.







6. Release the upper trim panel tabs from the lower trim panel assembly.

NOTE: Pull trim panel outward for this step.







7. Remove the upper B-pillar trim panel.

NOTE: Pull the trim panel outward and down for this step.







8. Remove the lower B-pillar upper clips.

NOTE: Trim panel clips must be correctly installed for correct trim panel fit.







9. Remove the lower B-pillar trim panel.

INSTALLATION
1. To install, reverse the removal procedure.

NOTE: Trim panel clips must be correctly installed for correct trim panel fit.