Body Support - Number 3
BODY SUPPORT - NUMBER 3Materials:
Material
Removal and Installation
NOTE: Left side shown, right side similar.
Upper and Lower Insulator - All Vehicles
1. Fold the rear seat forward.
Upper and Lower Insulator - Explorer Sport
2. Position the carpet aside.
Upper and Lower Insulator - Sport Trac
3. Open the storage compartment.
Upper and Lower Insulator - All Vehicles
4. Remove the body insulator plug
5. NOTE: This step may require holding the lower retainer with an appropriate tool.
Remove the body mount insulator bolt.
Lower Insulator - All Vehicles
6. NOTE: If the lower body mount will not remove, loosely install the body mount bolt and tap on the body mount bolt head with a hammer.
Remove the lower body mount insulator.
Upper Insulator - All Vehicles
7. Carefully raise the vehicle body enough to remove the upper body mount insulator.
Upper and Lower Insulator - All Vehicles
8. NOTE:
- Apply Threadlock 262 E2FZ-19554-B meeting Ford specification WSK-M2G351-A6 or equivalent to the mounting bolt.
- No lubricants of any kind are to be used during body insulator installation.
To install, reverse the removal procedure.