Front Fender Liner: Service and Repair

FENDER SPLASH SHIELD

Removal and Installation

Both Sides







1. Remove the fender splash shield front bolts.







2. Remove the fender splash shield screws.

LH Side







3. From inside the engine compartment, disconnect the wiring harness retainers from the fender splash shield.







4. Remove the ABS module nut.

RH Side







5. Position the vacuum reservoir aside.
1. Remove the bolts.
2. Position the vacuum reservoir aside.







6. Remove the fender splash shield bolts.

Both Sides
7. Remove the fender splash shield.
8. To install, reverse the removal procedure.