Front Bumper Cover / Fascia: Service and Repair

FRONT BUMPER COVER

Removal and Installation







1. Remove the radiator grille sight shield.
1. Remove the bolts.
2. Release the retaining clips.
3. Remove the radiator grille sight shield.







2. Remove the two parking lamp assemblies.
1. Remove the two bolts (one each side).
2. Remove the two parking lamp assemblies.
- Disconnect the electrical connectors.







3. Remove the two headlamp assemblies.
1. Pull upward to release the four tabs (two each side).
2. Remove the two headlamp assemblies.
- Disconnect the electrical connectors.







4. Remove the three lower radiator air deflector bolts.







5. Remove the six fender splash shield screws (three each side).







6. Remove the two front bumper cover bolts from inside the fender opening (one each side).







7. Remove the front bumper cover.
- Unclip the six locking tabs.

8. To install, reverse the removal procedure.