Heater Core Case: Service and Repair

REMOVAL
1. Remove the dash board. Refer to: Body and Frame, Interior Trim, Dashboard/Instrument Panel, Service and Repair, Removal and Installation, Service and Repair

2. Drain the radiator.
3. Disconnect the heater hoses from the heater core.






4. Remove the evaporator core housing, please refer to Heating and Air Conditioning/Evaporator Case/Service and Repair/ Service and Repair






5. Remove the nuts and remove the plenum chamber.

INSTALLATION







1. Follow the removal procedure in reverse order.
- Lubricate the hoses and fittings with Rubber Suspension Insulator Lube E25Y-1 9553-A or equivalent meeting Ford specification ESF-M99B112-A.