RH

Removal and Installation

CAUTION: This vehicle is equipped with a composite material fuel supply manifold. If the supply manifold is used as a leverage device, damage may occur to the supply manifold. Care must be taken when working around the fuel supply manifold.

1. Remove the upper intake manifold.
2. Drain the engine cooling system.





3. Disconnect the upper radiator hose and tube.
1 Remove the bolt.
2 Release the hose clamp and position hose and tube aside.





4. Remove the heater hose bracket and disconnect the transmission dipstick tube.
5. Disconnect the spark plug wires.





6. Remove the valve cover.
- Discard the gasket.
7. To install, reverse the removal procedure.