Harmonic Balancer - Crankshaft Pulley: Service and Repair

Special Tools:

Removal

1. Remove the fan shroud.
2. Remove the accessory drive belt.





3. CAUTION: This bolt is torque to yield and cannot he reused.

Remove the damper bolt.





4. Using the special tool, remove the crankshaft pulley.

Installation





1. Using the special tool, install the crankshaft pulley.





2. Install a new crankshaft pulley bolt.
- Tighten in two stages:
- Stage 1: Tighten to 60 Nm (44 ft. lbs.).
- Stage 2: Tighten 90 degrees.
3. Install the accessory drive belt.
4. Install the fan shroud.