Brake Pedal Assy: Service and Repair

Removal





1. NOTE: When removing the stoplight switch, retain the bushing and hairpin clip. They will be required for installation.

Disconnect the brake booster push rod.
1 Remove the hairpin clip.
2 Separate the stoplight switch and the brake booster push rod from the brake pedal pin.
3 Remove the brake booster push rod bushing.





2. Remove the bulkhead sound insulator.





3. Remove the bolts.





4. CAUTION: Support the brake master cylinder and power brake booster in the engine compartment.

Remove the brake pedal assembly.
1 Remove the nuts.
2 Remove the brake pedal assembly.

Installation








1. Follow the removal procedure in reverse order.