Manual

DISASSEMBLY
1. Disassemble the manual front bucket seat. For additional information, refer to Seat-Front Bucket, Manual.







2. Disconnect the seat cushion trim cover J-clips.







3. Remove the seat cushion trim cover.
- Disconnect the seat trim cover from the hook and loop strips.

CAUTION: Use care when separating the seat cushion trim cover from the hook and loop strip or the hook and loop strip may be torn from the seat cushion foam.







4. Remove the seat cushion.
- Disconnect the front and rear J-clips.







5. Remove the flexilator.
1. Remove the flexilator to frame springs.
2. Disengage the spring clip.
3. Disengage the flexilator hooks from the seat frame.
4. Remove the flexilator.
ASSEMBLY







1. Install the flexilator.
1. Position the flexilator.
2. Install the flexilator hooks to the seat frame.
3. Hook the spring clip.
4. Install the flexilator to frame springs.







2. Position the seat cushion trim cover on the seat cushion hook and loop strips.







3. Connect the seat cushion trim cover J-clips.
4. Assemble the manual front bucket seat. For additional information, refer to Seat-Front Bucket, Manual.