60% Portion of Rear 60/40 Split Bench
DISASSEMBLY1. Disassemble the 60 percent rear seat. For additional information, refer to Seat-Rear, 60% Portion of 60/40 Split Bench.
2. Remove the seat cushion legs.
1. Remove the pivot bolts.
2. Remove the seat cushion legs.
3. Remove the seat cushion frame from the seat cushion foam.
1. Unhook the seat cushion trim cover J-clips.
2. Remove the seat cushion frame from the seat cushion foam.
4. Invert the seat cushion trim cover.
5. Remove the seat cushion trim cover.
- Separate the seat cushion trim cover from the hook and loop strip.
CAUTION: Use care when separating the seat cushion trim cover from the hook and loop strip or the hook and loop strip may be torn from the seat cushion foam.
6. Remove the seat cushion flex mats.
1. Unhook the rear flex mat J-clips.
2. Unhook the front flex mat J-clips.
3. Remove the seat cushion flex mats.
NOTE: Use the brackets on the seat cushion frame to obtain the necessary leverage to unhook the rear flex mat J-clip.
ASSEMBLY
1. Install the seat cushion flex mats.
1. Position the seat cushion flex mats.
2. Hook the front flex mat J-clips.
3. Hook the rear flex mat J-clips.
CAUTION: The flex mat J-clips must be installed with the openings facing down or the seat cushion foam will be damaged.
NOTE: Use the brackets on the seat cushion frame to obtain the necessary leverage to hook the rear flex mat clip.
2. Position the seat cushion trim cover on the seat cushion hook and loop strips.
3. Install the seat cushion frame into the seat cushion foam.
1. Position the seat cushion frame.
2. Hook the seat cushion trim cover J-clips.
4. Install the seat cushion legs.
1. Position the seat cushion legs.
2. Install the rear seat riser pivot bolts.
5. Assemble the 60 percent rear seat. For additional information, refer to Seat-Rear, 60% Portion of 60/40 Split Bench.