40% Portion of Rear 60/40 Split Bench
DISASSEMBLY1. Disassemble the rear 40 percent seat. For additional information, refer to Seat-Rear, 60% Portion of 60/40 Split Bench.
2. Remove the rear seat legs.
1. Remove the pivot bolts.
2. Remove the rear seat legs.
3. Unhook the seat cushion trim cover J-clips.
4. Remove the seat cushion trim cover.
- Separate the seat cushion trim cover from the hook and loop strip.
CAUTION: Use care when separating the seat cushion trim cover from the hook and loop strip or the hook and loop strip may be torn from the seat cushion foam.
5. Remove the seat cushion flex mat.
1. Unhook the rear flex mat J-clip.
2. Unhook the front flex mat J-clip.
3. Remove the seat cushion flex mat.
NOTE: Use the brackets on the seat cushion frame to obtain the necessary leverage to unhook the rear flex mat J-clip.
ASSEMBLY
1. Install the seat cushion flex mat.
1. Position the seat cushion flex mat.
2. Hook the front flex mat J-clip.
3. Hook the rear flex mat J-clip.
CAUTION: The flex mat J-clips must be installed with the openings facing down or the seat cushion will be damaged.
NOTE: Use the brackets on the seat cushion frame to obtain the necessary leverage to hook the rear flex mat J-clip.
2. Position the seat cushion trim cover on the seat cushion hook and loop strips.
3. Hook the seat cushion trim cover J-clips.
4. Install the rear seat riser pivot bolts.
1. Position the rear seat legs.
2. Install the rear seat riser pivot bolts.
5. Assemble the rear 40 percent seat. For additional information, refer to Seat-Rear, 60% Portion of 60/40 Split Bench.