Trim Panel - Cowl Side

TRIM PANEL - COWL SIDE

Special Service Tool(s):

Special Service Tool(s)


Removal

NOTE: 4-door shown, 2-door similar.







1. Remove the front door scuff plate (13208).
1. Starting at one end and working along the front door scuff plate, use Windshield and Molding/Trim Removal Kit to remove the front door scuff plate.
2. Remove the front door scuff plate from the B-pillar.







2. Remove the cowl side trim panel (02345) by pulling outward to disengage the pin-type retainers.

Installation
1. To install, reverse the removal procedure.