Front Fender: Service and Repair

FENDER - FRONT

Removal
1. Remove the grille opening panel reinforcement.
2. Remove the front bumper (17757).
3. Remove the front panel of the rocker panel trim or, if equipped, the running board(s).
4. Remove the front wheel and tire assembly.







5. Remove the front fender apron (16054).
1. Remove the screws.
2. Remove the bolts.







6. Remove the lower fender to rocker panel bolts and spacers.







7. NOTE: The front door must be open to gain access to the fender bolt.

Remove the fender bolt.







8. Remove the fender to front fender radiator support brace bolt.







9. If removing the RH front fender, position the speed control servo (9C735) aside.
1. Remove the bolt.
2. Position the speed control servo aside.

10. If removing the RH front fender, remove the antenna.







11. Remove the front fender (16005).
1. Remove the top fender to inner fender bolts.
2. Remove the front fender.

Installation







1. Install the front fender.
1. Install the front fender.
2. Install the top fender to inner fender bolts.

2. If installing the RH front fender, install the antenna.







3. If installing the RH front fender, install the speed control servo bracket.
1. Position the servo bracket.
2. Install the bolt.







4. Install the fender to front fender radiator support brace bolt.







5. NOTE: The front door must be open to gain access to the bolt.

Install the top fender to inner fender bolt.







6. Install the fender to rocker panel bolts and spacers.







7. Install the front fender apron.
1. Install the front fender to front fender apron screws.
2. Install the top fender to inner fender bolts.

8. Install the front wheel and tire assembly.
9. Install the front panel of the rocker panel trim or, if equipped, the running board(s).
10. Install the front bumper.
11. Install the grille opening panel reinforcement.