Headlamp Dimmer Switch: Service and Repair

REMOVAL
1. Disconnect the battery ground cable.





2. If so equipped, twist the tilt wheel handle and shank and remove.

NOTE: For clarity, the steering wheel is not shown in the illustration.





3. Remove the upper and lower steering column shrouds.
(1) Remove the three screws.
(2) Remove the lower steering column shroud.
(3) Remove the upper steering column shroud.





4. Remove the multi-function switch.
(1) Remove the screws,
(2) Disconnect the two electrical connectors.
(3) Remove the multi-function switch.











INSTALLATION
1. Follow the removal procedure in reverse order.

NOTE: When the battery has been disconnected and reconnected, some abnormal drive symptoms may occur while the powertrain control module (PCM) relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.