Four Wheel Anti-Lock Brake System (4WABS)

H5 TEST FOR INTERMITTENT SENSOR FAULT

- Key "OFF."

- Disconnect the Rear ABS sensor.

Rear Brake Anti-lock Sensor Connector:

- Measure the resistance between the two pins of the rear brake anti-lock sensor.

NOTE: If at first the resistance is within specifications, a drive over rough roads and performing normal brake applications while monitoring the resistance, is recommended to help reveal any intermittent faults.

Is the resistance between 900 and 1500 ohms?

> Yes
H6

> No
Replace the Rear ABS sensor. H9