DT4 Check For Marginally High Sensor Gap (at 25 MPH)

DT4 CHECK FOR MARGINALLY HIGH SENSOR GAP

- Clear all DTCs.

- Key "OFF."

- Start the vehicle and accelerate to 40 km/h (25 mph). Let at least 45 seconds elapse before reaching 40 km/h (25 mph).

Does the yellow ABS warning indicator illuminate?

> Yes
Go to Drive Cycle Test DT8. DT8 Determine Which Sensor Signal Is Incorrect

> No
Go to Drive Cycle Test DT5. DT5 Determine Drive Test Is Complete