DT3 Check For Marginally High Sensor Gap (at Idle)

DT3 CHECK FOR MARGINALLY HIGH SENSOR GAP

- Clear all DTCs.

- Key "OFF."

- Start the engine.

- Place transmission in "LOW 1."


- Allow the vehicle to creep forward at idle for at least 45 seconds.

Does the yellow ABS warning indicator illuminate?

> Yes
Go to Drive Cycle Test DT8. DT8 Determine Which Sensor Signal Is Incorrect

> No
Go to Drive Cycle Test DT4. DT4 Check For Marginally High Sensor Gap (at 25 MPH)